GI Chain Link Fencing
GI Chain Link Fencing
The popularity of chain-link fence is due to its relatively low cost and ease of installation. A further advantage is that due to the open weave, chain-link fences are transparent, and do not obscure sunlight from either side of the fence.
If a semi-opaque fence is desired, this can be achieved by the insertion of slats into the mesh. Chain link fencing is widely used as Access Prevention Fencing. Road Fencing Links is used to prevent the unwanted access of animals, peoples & vehicles in bounded area. This is most economical concept in modern fencing.
Angle iron posts, pipe posts or wooden poles containing chain link fencing fabric can be easily installed and reinstalled, chain link fencing fabric is a fencing material made of steel wire helically wound and inter woven in such a wanner as to provide continuous wesh without knots or ties except in the form of knockling or twisting the ends of the wires to form the selvage of the fabric.
Features :
- Long lasting
- Reasonable prices
- Precise dimensions
It is available in various sizes :
- 1″ hole size
- 1 1/4″ hole size
- 1.5″, 2″, 3″ and 4″
- Using 1.60 mm to 4 mm thickness
Chain Link Mesh Opening Measure :
Measure your chain link mesh diagonally (inside measurements) as shown in the photograph. If the measurement is 2″ then the gauge of the wire is typically 9 or 11. If the measurement is 2 1/4″ or 2 3/8″, then the gauge of the wire is usually 11 1/2, 12 or 12 1/2.
The most common mesh sizes for chain link fence are 2″ (typically 9 or 11 gauge wire) and 2-1/4″ or 2-3/8″ (typically 11-1/2, 12 or 12-1/2 gauge wire).
You have to measure across when you are dealing with chain link mesh. Be sure that you measure a few different spots on your fence line. It is very common for chain link fence to be stretched too far and the diamonds vary. You measure across just like the arrows are showing on the picture below.